UV Printer – Ten Specs to Think About Whenever Purchasing a UV Printer.

Do you want to put in a photo for your quilt that looked a lot more like part of the fabric than an iron-on decal?

In past times, we trusted photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new way of getting your chosen photo from the scrapbook and on to your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. By using a price of about $20,000, it’s not practical to perform out and purchase your personal DTG printer. The typical price for ripple printer is $8 to $10.

This procedure is a bit higher priced compared to the traditional photo transfer method. That’s partially since the technology is very new. If you decide to try out a DTG photo in your memory quilt block, there are a few things to look for in selecting the printer who can perform be right for you:

1. Make sure there are no chemicals needed to pre-treat your fabric first. Some DTG printers create a graphic that may be similar to screen printing. You don’t want that appear to be or feel on your own quilt. The ink will be hard on the top of the material and may eventually (sometimes much earlier than later) will start to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. If you can experience the ink is raised higher than the surface in any respect by any means, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a kind of digital DTG printing made available from the Brother GT 541. There are no chemicals required to pre-treat the material. The inks bond using the natural fibers and so are heat cured to create the image. The inks are water based, that helps leave a soft yet crisp image on your own fabric.

There are several downfalls to using led uv printer on the quilt blocks. One pitfall is color limitations. Since DTG printing is a form a digital printing, there is no white ink. White is the lack of color. Which means that you are unable to print a photograph on navy blue or black fabric.

Digital garment or fabric printing is really a CMYK format – cyan, magenta, yellow, and black. You can mix those colors to obtain a full spectrum of accurate colors – just not white. You will find DTG printers that print white ink, but the majority of people require chemical pre-treatments for the material and may leave you with that thick surface print.

You have to work with a light colored or neutral fabric and it needs to be cotton or perhaps a cotton blend. The fabric must be capable of withstand 350 degrees for approximately thirty seconds. In case you are not 09dexypky with 100 percent cotton or possibly a 50/50 blend, ask your printer if the fabric works.

Size of your print might be a limitation. Most DTG printers have a printing field approximately 14 inches x 16 inches. For almost all quilters, that size range won’t be considered a problem.

And talking about printing fields, here’s a hint. Most direct to garment printer charge for a 14×16 surface. When your blocks will allow 2 or 3 photos to fit within that range, you could get them printed for the price of one. Check with the printer to determine if it’s possible with the particular project.

Like the majority of technological advances, the price of digital garment (or fabric) printing probably will decrease with time. Maybe it is going to even be available on smaller printers for home and personal use. For the time being, try to look for a DTG printer for your upcoming photo quilt project. The final results may be like custom fabric, that will be an incredible touch for your one of a kind quilt!

Leave a Reply

Your email address will not be published. Required fields are marked *